You could win THE ULTIMATE 1000 HP Shop Truck built by Motion Raceworks, PLUS $5000 cash by shopping at Motion Raceworks or TBM Brakes. Giveaway Starts August 26 and goes thru October 6, 2024

Every $5 you spend gets you an AUTOMATIC Entry! No Maximum number of entries!

*no purchase necessary - details below

Ultimate ZZ632 OBS Shop Truck Giveaway

Every car guys dream is to have a bitchin' shop truck. So who wouldn't want to own this 1000HP ZZ632 GM Crate Motor powered 1993 OBS Chevy Silverado. We built this truck on the Motion youtube channel and it has all the right components to haul parts and haul ass. Win this truck and $5000 cash in the Motion Racework's Ultimate Shop Truck Giveaway!

This truck hauls more than just parts...

The Motion Raceworks shop truck integrates some of the best go fast parts from not only our catalog, but across the industry and combines them with our knowledge of going fast and created a monster! On pump gas, naturally aspirated this truck has been a best of 9.22 @ 148mph. How fast can this truck go with nitrous? We might find out soon...

Did we mention this thing does awesome burnouts... on demand?

This truck runs on pump gas so it is easy to drive it often and stomp on the loud pedal every single time. Stock up on tires though because they don't stay on the wheels very easily if ya know what we mean...

 

 

ZZ632 Engine

ZZ632 GM 1000HP Pump Gas Crate Engine

Chevrolet’s Biggest, Baddest Big-Block Ever!
• Tall-deck Sportsman Bowtie block with an all-forged roller assembly
• Hydraulic roller camshaft and all-new, high-flow spread-port cylinder heads derived from Pro Stock racing technology
• Crank-trigger ignition system with coil-near-plug ignition coils mounted on a unique valley plate
• EFI induction system for precise fuel control and stunning output with pump gas
• Kit includes pre-programmed, self-learning control system
• Due to crate fitment, the throttle body is shipped uninstalled and must be installed by the engine installer
• Requires starter, EFI-compatible high-pressure fuel pump and air cleaner compatible with 4500-series (Dominator) mounting flange
 
TECH SPECS
Part Number: 19432060
Engine Type: Chevy Tall-Deck Big-Block V-8
Displacement (cu in): 632
Bore x Stroke (in / mm): 4.600 x 4.750
Block (P/N 19366599): Cast iron Bowtie with 4-bolt main caps – tall deck
Crankshaft (P/N 19366600): Forged 4340 steel
Connecting Rods (P/N 19432392): Forged steel H-beam
Pistons (P/N 19366601): Forged aluminum 2618 alloy
Intake Manifold (P/N 19366614): Aluminum high-rise single-plane
Throttle Body (P/N 19366624): 4500-style
Fuel Injectors (P/N 19432057): 86-lb/hr
Camshaft Type (P/N 19432531): Billet steel hydraulic roller
Valve Lift (in): 0.780 intake / 0.782 exhaust
Camshaft Duration (@ 0.050 in): 270º intake / 285º exhaust
Cylinder Heads (P/N 19431810): Aluminum spread-port; 70cc chambers – RS-X design
Valve Size (in): 2.450 intake / 1.800 exhaust, titanium (5/16-in stem OD)
Ignition Type: 58X crank-triggered, coil-near-plug
Compression Ratio: 12.0:1 (nominal)
Rocker Arms (P/N 19431272): Forged aluminum; roller-style
Rocker Arm Ratio: 1.8:1 (shaft-mount)
Water Pump (P/N 14058915): Aluminum
Oil Pan (P/N 19366604): Steel 8-quart
Recommended Fuel: Premium pump (93 octane or higher)
Maximum Recommended RPM: 7,000 rpm
Balanced: Internal
 

Transmission

Fuel System

  • Factory Replacement Tank with Motion Raceworks Billet Sump
  • Magnafuel 4303 EFI Pump
  • Fluidworks 10 micron post filter https://motionraceworks.com/products/motion-raceworks-dual-outlet-10an-fuel-filter-w-mount-10-micron-27-170

Rear end / Rear Suspension

  • Quick Performance Bolt In 9"
  • 35 spline axles
  • Aluminum Thirdmember with 3.70 gear
  • Caltract Suspension
  • TRZ Anti Roll Bar
  • Menscer Motorsports Radial Valve Leaf Spring Shocks

Brakes

EFI, Electronics & Sensors

  • Holley Terminator X ECU
  • Holley 6.86" dash
  • RIFE fuel pressure sensor
  • RIFE oil pressure sensor
  • XS Battery 16v Battery
  • RIFE 7" Shock Travel Sensor

Wheels / Tires

  • Front: Billet Specialties Dominator 17" Front Runner 5x4.75" bolt pattern
    • Mickey Thompson 17x6 S/R radial front runner tire
  • Mickey Thompson Gen 1 15x10 with Mac Fab Beadlocks
    • Mickey Thompson 275/60/15 drag radial

Front Supsension

  • Moore Race Chassis upper and lower tubular A arms
  • Elevated Concepts Rack and Pinion Conversion
  • Menscer Motorsports Coilover shocks

Chassis & Safety

  • 10 point 8.50 cert NHRA legal cage
  • Stroud Safety 5 point harness
  • NHRA legal battery kill switch

This ZZ632 powered shop truck is the perfect combo of raw power and Americana!

- Doug Cook, CEO, Motion Raceworks

A work truck unlike any other...

This truck very well may be the epitome of an all american work truck. From the patina, to the engine, to the beautiful cage work, the comfortable factory original interior, the usable bed, and all of the hot rod parts on it. It is functional, fast as hell, and an absolute blast to drive!

Get shopping and get entered!

*no purchase necessary - details below

Watch the Motion Youtube Build Series

You may have also seen this truck on the Vice Grip Garage Youtube Channel!

*Ultimate ZZ632 OBS Shop Truck Giveaway. NO PURCHASE NECESSARY TO ENTER OR WIN. A PURCHASE WILL NOT INCREASE YOUR CHANCES OF WINNING. Open to residents of the 48 contiguous United States (excludes AK & HI) and the District of Columbia, who are age of majority & licensed drivers. Void in the states of AK and HI, and where prohibited. Begins August 26, 2024 and ends 11:59:59 PM CT on October 6, 2024. Grand Prize is valued at $45,000 USD. Odds of winning depend upon the number of eligible purchase and no-purchase entries received. See Official Rules for complete details including how to enter without making a purchase. Sponsor: MOTION RACEWORKS LLC, 112 E Industrial St, Dewitt, IA 52742